EPM V3 cable set (UART UAVCAN external button)

New product

1x Standard UAVCAN cable, also compatible with Pixracer 

1x UAVCAN cable 3D Robotics Pixhawk compatible

1x External Button 

1x Programming JST-GH plug pigtail for firmware flashing and UART access 

More details

$6.99

More info

Standard UAVCAN cable, also compatible with Pixracer 

1x CAN bus termination plug - JST-GH plug with a 120 Ω resistor between the pins CAN H and CAN L.

1x 20 cm cable with a standard JST-GH plug / housing  on both ends.

3D Robotics Pixhawk compatible

1x CAN bus termination plug - JST-GH plug with a 120 Ω resistor between the pins CAN H and CAN L.

1x 20 cm cable with a standard JST-GH plug on end and a DF13 plug on the other.

External Button 

1x JST-GH plug -> Push Button SPST

Documentation: here

Programming JST-GH plug pigtail for firmware flashing and UART access 

1x JST-GH plug pigtail 

Requires FTDI cable, 3.3[V] preferred, 5[V] acceptable 

Firmware Flashing / Debug Documentation: here