End_of_live There are 8 products.

Showing 1 - 8 of 8 items
  • Deprecated, replaced with V3R5C The OpenGrab EPM v3 is an electropermanent magnet, combining the advantages of electro and permanent magnets. The device creates a very strong magnetic contact with a ferrous target. It supports UAVCAN, RC PWM and push button operation. OpenGrab EPM v3 has been developed by NicaDrone in cooperation with Zubax Robotics.

  • $109.00

    <Out of Stock> High-performance open-source positioning module for outdoor environments, interfaced via doubly redundant UAVCAN bus. It includes a state-of-the-art GPS/GLONASS receiver, a high precision barometer and a 3-axis compass.

    $109.00
  • $143.89

    <Out of Stock> Everything you need to use Zubax GNSS with 3D Robotics Pixhawk v1, plus USB-UART adapter cable. The cable can be used to configure Zubax GNSS.

    $143.89
  • $114.89

    <Out of stock> Everything you need to use Zubax GNSS with 3D Robotics Pixhawk v1. Note that this kit does not include a USB-UART adapter cable, but this other kit does. The adapter cable provides a more convenient way to configure Zubax GNSS than UAVCAN.

    $114.89
  • Deprecated, replaced with V3R5C The EPM688-V2.5 is an Electro Permanent Magnet, combining the advantages of electro and permanent magnets. With virtually no power during steady state operation (<1mW) and 800mA for 1.2s during a switch cycle.  Holding force and consistency have been greatly improved (5kg under adverse conditions) and is more resistant...

  •   < Obsolete- replaced with EPM 688-V2.0 > The EPM688-5 is an Electro Permanent Magnet, combining the advantages of electro and permanent magnets. This Device comes with integrated electronics that can be operated with 3.3 and 5V TTL signals and uses 5V Vcc. It can hold up to 8kg. 

  • Discontinued OGCAN is an open hardware CAN bus interface that allows you to control the EPM and to monitor its state via standard CAN bus or via serial CLI. Supported CAN protocols: CANaerospace, UAVCAN.

  • Deprecated, replaced with V3R5C This only exist for reference The EPM688-V2.0 is an Electro Permanent Magnet, combining the advantages of electro and permanent magnets. Ideal for cargo clamping on UAVs like quadrocopters. With virtually no power during steady state operation (<1mW) and 600mA for 0.3s during a switch cycle. 

Showing 1 - 8 of 8 items