Cables & Connectors There are 4 products.

Showing 1 - 4 of 4 items
  • $6.99

    1x Standard UAVCAN cable, also compatible with Pixracer  1x UAVCAN cable 3D Robotics Pixhawk compatible 1x External Button  1x Programming JST-GH plug pigtail for firmware flashing and UART access 

    $6.99
  • $3.99

    1x CAN bus termination plug - UAVCAN Micro plug with a 120 Ω resistor between the pins CAN H and CAN L. 1x 20 cm cable with a standard UAVCAN Micro plug (CLIK-Mate, 4 circuits, 1.25 mm) on one end and a JST DF13 4-circuit plug (3D Robotics Pixhawk v1 compatible) on the other end.

    $3.99
  • $3.99

    1x CAN bus termination plug - JST-GH plug with a 120 Ω resistor between the pins CAN H and CAN L. 1x 20 cm cable with a standard JST-GH plug / housing  on both ends. Standard UAVCAN cable, also compatible with Pixracer 

    $3.99
  • $3.99

    1x CAN bus termination plug - JST-GH plug with a 120 Ω resistor between the pins CAN H and CAN L. 1x 20 cm cable with a standard JST-GH plug on end and a DF13 plug on the other. 3D Robotics Pixhawk compatible

    $3.99
Showing 1 - 4 of 4 items